LELY 5.4301.0000.1, Инструкция по установке и эксплуатации

Страница: 52 / 126

4-24 Description and Operation
D-I012.1109EN
innovators in agriculture
4.3.2.9 Feed Groups
The menu 'Feed groups' is used to define the feed groups.
You can link a feed push action, the full action or a part of it, to a feed
group. A push power is set for each feed group.
A feed group can only be assigned to feed push actions. It is possible to
use the same feed group for more than one action.
4.3.2.10 Push Power Feed Groups
The menu 'Pushpwr feedgr' is used to define the push power for the
feed for a feed group. There are four levels of push power: high,
average, low and extra low.
4.3.3 Settings
RealTime clock
The menu RealTime clock is used to set the date and time of the JUNO
150. The correct date setting is also important to search for alert reports
on a date.
Date 02-09- 8 (dd/mm/y)
Time 16:53 (24h format).
Language
The menu Language is used to modify the language of the E-Link.
Gyroscope
The menu Gyroscope is used to recalibrate the gyroscope. The JUNO 150
must not be moved during the calibration.
Feed push power
The menu Feed push power is used to modify the force of the JUNO 150.
There are three settings:
•
High
•
Medium
•
Low
•
Extra low.
Strip width
Select the correct strip width:
•
50 mm (2.0 in)
•
70 mm (2.8 in)
•
90 mm (3.5 in).
Inductor height
Set the distance between the inductive sensor and the strip. The distance
between the inductive sensor and the strip must be minimum 10 mm
(0.4 in).