Leitronic AG EasyAlarm BASIC, Инструкция пользователя, Страница: 26 / 32

26
10.7 Dialling-in (Remote-access)
10.7.1 Program ringing cycles
The number of ringing cycles until
EasyAlarm®
answers the call is defined in register 4 7 :
OFF ON
PROG
* . 9 . 7 . 1 . 3 4 7 # . # . * . Value # .
OFF ON
PROG
Value Comment
0
EasyAlarm®
does not answer any call
2..9
EasyAlarm®
answers call after Value ringing cycles (factory setting: Value=2)
10.7.2 Dialling in sequence
Behaviour on dialling-in mode is defined in register 7 0 that can be read out or modified as follows:
OFF ON
PROG
* . 9 . 7 . 1 . 3 7 0 # . # . * . Value # .
OFF ON
PROG
Value Comment
0
EasyAlarm®
answers call directly after the programmed ringing cycles (=factory setting)
1
EasyAlarm®
answers call after a two-step dialling -in sequence
10.7.3 Connection mode after dialling-in
Phone connection mode after dialling-in is defined in register 7 1 that can be read out or modified as follows:
OFF ON
PROG
* . 9 . 7 . 1 . 3 7 1 # . # . * . Value # .
OFF ON
PROG
Value Comment
0
EasyAlarm
®
does not signal a successful dialling in and switches in listening-in connection ( =factory setting)
1
EasyAlarm
®
establishes hands-free connection announced by three gong signals.
10.7.4 Handling of incoming calls
Answering incoming call by pressing the emergency button or any key can be selected as follows:
OFF ON
PROG
* . 9 . 7 . 1 . 3 7 2 # . # . * . Value # .
OFF ON
PROG
Value Comment
0
EasyAlarm
®
is not responding by activation of the emergency button or any key of the alarm unit
1 The call can be received by pressing the emergency button or any key of the alarm unit (=factory setting)
10.8 Remote programming
The calling numbers as well as the sequence of the calling numbers are programmable during phone connection . This
function is disabled (factory setting), but can be enabled as follows:
10.8.1 Enabling of remote programming
Remote programming is defined in register 7 6 that can be read out or modified as follows:
OFF ON
PROG
* . 9 . 7 . 1 . 3 7 6 # . # . * . Value # .
OFF ON
PROG
Value Comment
0
EasyAlarm®
cannot be remote programmed (=factory setting)
1
EasyAlarm®
is ready for remote programming
Value
Value
Value
Value
Value