Leitch DMX-3901-A, Инструкция по установке и эксплуатации, Страница: 39 / 64

24 DMX-3901-A Installation and Operation Manual
Chapter 3: Operation
Gain_1a,
Gain_1b,
Gain_2a,
Gain_2b Gain: Channel 1a
to
Gain: Channel 2b Adjusts the gain for output channel 1a
through to channel 2b –90 to +31.5 dB
(0 dB*)
Invert01 to
Invert16 Invert: Channels
01 to 16 Controls the invert for input channels 01 to16 • No*
• Yes
Out1aSrc Out1a Source
Select Selects the source for analog output 1,
channel a
• Ch01* to Ch16
• Mute
Out1bSrc Out1b Source
Select Selects the source for analog output 1,
channel b
• Ch01 to Ch16
• Mute (Ch02*)
Out2aSrc Out2a Source
Select Selects the source for analog output 2,
channel a
• Ch01 to Ch16
• Mute (Ch03*)
Out2bSrc Out2b Source
Select Selects the source for analog output 2,
channel b
• Ch01 to Ch16
• Mute (Ch04*)
FadeRate Fade Rate Controls the rate of fading when channels are
swapped or muted 0 to 10 s
(0.010 s*)
DitherMode Dither Mode Selects the dithering mode for all outputs
• None*
• On
Out1a_DR,
Out1b_DR,
Out2a_DR,
Out2b_DR Out 1a Dither
Resolution to
Out 2b Dither
Resolution Selects the dithering resolution for output
channel 1a to channel 2b
• 24 bits
• 20 bits*
• 16 bits
DnBusEn Down Bus Enable Allows the passing of signals to the
downstream module for concatenated
function
• No*
• Yes
FctryRcl Factory Recall Recalls the factory setting
• No*
• Yes
Setup Setup Parameters Sets the parameters for display and usability
(See
page 40 for a complete list of Setup
parameters and their factory default settings)
Various
Table 3-2. Operator and All List Parameters (Continued)
Card-Edge ID
Parameter
Name
Function
User Range
and Options