Leitch DMX-3901-A Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 64

Leitch DMX-3901-A Скачать руководство пользователя страница 37

22

DMX-3901-A Installation and Operation Manual

Chapter 3: Operation

Operator and All List Parameters

This complete list of parameter settings is arranged so that the settings
most likely requiring changes are placed at the top of the list. Items on
the bottom of the list are the least likely to require changing. Parameters
with the designation [RO] are “read-only.” An asterisk (*) indicates the
default user range or value.
The All List is a long flat list of all the available parameters, arranged
from the most-used to least-used. It is intended for a “Supervisor”
security designation. The Operator List is a condensed version of the
All List, and is intended for an “Operator” security designation. The
following table shows all available parameters. Parameters accessed
only from within the All List are shaded in gray.
See

“Navigating the Operator and All Lists” on page 21

for instructions

on navigating this list using card-edge controls.

Note

You can reset the default values
for all of the parameters
automatically via the

FctryRcl

parameter, found in this table.

Table 3-2.

Operator and All List Parameters

Card-Edge ID

Parameter

Name

Function

User Range

and Options

SdiStdSet

Serial Digital
Interface Video
Standard Set

Selects the line standard for the incoming
digital video

• Auto*
• D1-525
• D1-625

SdiStdFb

[RO]

Serial Digital
Interface Video
Standard Feedback

Returns the SDI input video signal standard

• Unknown
• D1-525
• D1-625

SdiPrsnt

[RO]

Serial Digital
Interface Input
Video Present

Returns the presence of the SDI input signal

• No
• Yes

EdhPrsnt

[RO]

Error Detection
and Handling
Present

Returns the presence of EDH from the input
SDI signal

• No
• Yes

EdhErrCnt

[RO]

Error Detection
and Handling
Error Counter

Returns the number of occurred EDH errors

0* to 16777215

EdhErrClr Error

Detection

and Handling
Error Clear

Clears the EDH error counter

• No*
• Yes

«
...
35
36
37
38
39
...
»

Содержание DMX-3901-A

































































Отзывы:

Нет отзывов