Leitch DMX-3901-A Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 64

Leitch DMX-3901-A Скачать руководство пользователя страница 13

x

DMX-3901-A Installation and Operation Manual

Preface

Safety Terms and Symbols

This manual uses the following safety terms and symbols. See your

NEO Safety Instructions and Precautions Guide

for more information.

Trademarks and Copyrights

CCS, CCS CoPilot, CCS Navigator, CCS Pilot, Command Control System,
CineTone, CinePhase, CineSound, DigiBus, DigiPeek, Digital Glue,
DigiWorks, DTV Glue, EventWORKS, EZ HD, Genesis, HDTV Glue,
Image Q, Inca, Inca Station, InfoCaster, Inscriber, Inscriber CG—FX,
Integrator, LeFont, Leitch, LogoMotion, MediaFile, MIX BOX, NEO, the
NEO design, NEOSCOPE, NewsFlash, Nexio, Opus, Panacea,
PanelMAPPER, Portal, PROM-Slide, RouterMAPPER, RouterWORKS,
Signal Quality Manager, SpyderWeb, SuiteView, TitleMotion,
UNIFRAME, Velocity, VelocityHD, VideoCarte, Videotek, and X75 are
trademarks of Leitch Technology International Inc., which may be
registered in the United States, Canada, and/or other countries.All other
trademarks are the property of their respective owners.
Copyright 2005, Leitch Technology International Inc. All rights reserved.
This publication supersedes all previous releases. Printed in Canada.

Warranty Information

The Leitch Limited Warranty Policy provides a complete description of
your warranty coverage, limitations, and exclusions, as well as
procedures for obtaining warranty service. See the inside back cover of
this manual for a warranty summary. To view the complete warranty,
visit

www.leitch.com>Support>Warranties

.

Table P-5.

Safety Terms and Symbols Used in Manual

WARNING:
Statements identifying conditions or practices that can result in
personal injury or loss of life: High voltage is present. Uninsulated
dangerous voltage within the product’s enclosure may be sufficient
to constitute a risk of electric shock to persons.

CAUTION:
Statements identifying conditions or practices that can result in
damage to the equipment or other property: Important operating
and maintenance (servicing) instructions in the literature
accompanying the product.

«
...
11
12
13
14
15
...
»

Содержание DMX-3901-A

































































Отзывы:

Нет отзывов