Leitch 6800/7000 Series Скачать руководство пользователя страница 179

Страница: 179 / 230

6800/7000 Series - Audio and Video Multi/Demultiplexing Products Installation and Operation Manual

149

Control Parameter Details

Chapter 9: MXA-6800-AES and MXA-6801-A2/A4 Video/Audio Multiplexer Module

Operator Mode 2

The following table describes the

Operator Mode 2

with switch positions

and

AES1: Swap L/R channels or Channel A: Swap L/R channels.

• If set to Off, do not swap the L/R channels.

• If set to On, swap the L/R channels. The default is Off.

Swap AES inputs or Swap Channel A with Channel B
If set to Off, do not swap the AES/Channel inputs
If set to On, swap the AES/Channel inputs. The default is Off.

Operator
Mode

Switch
Position

Result

Operator
Mode

Switch
Position

Result

No adjustment
When the Hex switch is in this position, no parameters can be
altered and three dashes “- - -” will be displayed on the Hex
display.

Operator mode: Can be changed to OS1, OS2, OS3.

Sample Distribution

• When the Video Standard is 525, the valid range is 0 to 3.

• When the Video Standard is 625, the valid range is 0 to 2.

The default is 0.

See

“Switch Position 2 and Function” on page 155

for further information.

Automatic Mute/Silence on Audio Error

• If this parameter is turned On, mute both channels in the AES

input, which displays the audio error.

• The default is Off.

(Not applicable for the MXA-6800-A2/A4)

Содержание 6800/7000 Series







































































































































































































































Результаты поиска

Содержание 6800/7000 Series

Отзывы:

Leitch 6800/7000 Series, Инструкция по установке и эксплуатации, Страница: 179 / 230

Результаты поиска

Содержание 6800/7000 Series

Отзывы: