Leisure Travel Vans 2013 Unity, Руководство пользователя

Страница: 62 / 92

Unity Motorhome Water / Plumbing System
1-62
Disconnecting
Turn “OFF” the city water supply. 1.
Relieve water pressure in the line by opening a faucet 2.
in the Motorhome.
Disconnect the hose from the city water connection
3.
(1).
Replace the protective plug back over the city water
4.
connection.
Fresh Water Tank Filling
City Water
Connect water hose to the city water inlet connection 1.
(1).
Turn the water fill selector valve (2) to water tank fill
2.
(position A).
Turn “ON” the city water supply.
3.
Depress and hold the fresh water tank level switch (3) 4.
to show the level percentage in the LED display (4).
Once the fresh water level reads full on the monitor
panel, turn off the city water supply.
Turn the water pump switch (5) on the system monitor
5.
panel to the “ON” position.
Slowly open the cold water tap until the water runs
6.
smoothly. Repeat with the hot water taps.
Potable Water
When a city water supply connection is not available,
the fresh water tank can be filled using the following
procedure.
Fill a suitable water container with potable water. 1.
Place the suction hose (6) attached to the winterize 2.
by-pass valve into potable water container.
NOTE: The winterize by-pass valve is located
in seating, bed cabinet or road side exterior
compartment .
Turn the by-pass valve (7) to “WINTERIZE.” 3.
Turn the water pump switch (5) on the system monitor 4.
panel to the “ON” position.
Depress and hold the fresh water tank level switch (3)
5.
to show the level percentage in the LED display (4).
Once the fresh water level reads full on the monitor
panel, turn water pump “OFF.”
Turn the by-pass valve (7) to “NORMAL FLOW.”
6.
2
1
B
A
5 4
3
6
6
7
5