Leisure Travel Vans 2013 Unity, Руководство пользователя

Страница: 32 / 92

Unity Motorhome Vehicle Operation
1-32
Warning
Make very sure that everyone is standing clear of the
interior and exterior path of the slide out room as you
extend or retract it.
1
Check the interior of the slide out room to make sure 6.
there are no obstructions on the floor or leaning
against the walls.
Close all cabinet doors.
7.
Check the exterior of the unit to ensure all baggage 8.
doors are closed and all obstructions are removed.
Make sure all people stand clear before operating the
9.
slide out room controls.
To Extend the Slide Out Room
The slide out control switch (1) is located in the locker
above the coach entrance doorway.
Depress and hold the bottom of the switch until slide 1.
out room is fully extended. Make sure the slide out
room is fully extended so that all weather seals will
be in correct alignment. Release the switch when the
room is fully extended.
To Retract the Slide Out Room
IMPORTANT
Ensure that the lounge table, if equipped, is raised
before retracting the slide out room.
Depress and hold the top of the switch until the slide 1.
out room is fully retracted. Make sure the slide out
room fully retracted so that all weather seals will be in
correct alignment. Release the switch when the room
is fully retracted.
Service
Service by a professional, adjustments, regular
maintenance and replacement of weather seals as
needed will extend the life and comfort of your slide out
room.
Seals
Cracked and worn weather seals around the slide out
room may allow moisture and dirt to enter your Motorhome
and cause premature deterioration of the interior. Check
the seals carefully in fall and in spring and have them
replaced if necessary.
Extensive travel and use in severe weather conditions
may cause more rapid deterioration of some components,
especially weather seals.