Unity Motorhome
Vehicle Operation
1-35
Rotate the support leg (1) 90 degrees and swivel the
3.
support leg down.
1
4
2
Lift the retaining pin (2) on the coach awning support
4.
bracket and insert the support let foot plate (3). Allow
the retaining pin (2) to drop down to lock the foot plate
in place.
Repeat steps #2 , 3, 4 to install the left support leg.
5.
Ensure that the latches (4) in the left & right support
6.
legs are unlocked (raised).
Fully extended the awning by depressing and holding
7.
awning switch in the “OUT” (extend) position.
3
Lift the lead rail of the awning to the desired height and
8.
lock the left & right latches in turn (4).
NOTE: It is suggested that the side of the awning
furthest away from the coach door is set lower to
enable rainwater to run off.
Retracting the Awning
Release and stow the legs in reverse order to steps
1.
described to extend the awning.
Retract the awning by depressing and holding the
2.
awning switch in the “IN” (retract) position until the
awning is completely retracted.
Refer to the owner instructions in the information kit for
further details.
Содержание 2013 Unity
