38
Use only original Leister spare parts and accessories; otherwise, any warranty or guarantee claims will be invali-
dated.
You can find more information at
10. Accessories
11. Maintenance
Disconnect the device from the power supply and allow to cool before carrying out
any maintenance or repair work.
11.1 Lubrication axial groove ball bearing
11.2 Cleaning the filters (16)
After 500h operation of the drive motor, the message Maintenance Servicing
appears on the
control panel (2).
The
filters (16)
should be cleaned once a week with the brush.
The axial grooved ball bearing must be relubricated
every 500 h.
When the drive is running, re-lubricate a maximum of
1 cm
3
grease quantity using a grease gun.