manualshive.com logo in svg

Leister WELDPLAST 600, Руководство пользователя, Страница: 30 / 40

Поделиться
Скачать
Leister WELDPLAST 600 Скачать руководство пользователя страница 30

30

Switched off at the factory 

•  To switch on GPS, select the 

GPS

 menu item in 

the menu by pressing the 

Minus (32)

 button; then 

press the 

Confirm (33)

 button.

The GPS coordinates of the welds are now displayed in 

the welding protocol.

GPS

•  In the menu, by pressing the 

Minus button (32),

 

select the GPS position menu item, then press the 

Confirm button (33)

 

•  With an existing satellite connection, GPS position 

data are visible by pressing the 

Minus/Plus button 

(32).

 

•  The symbol for GPS reception is displayed in the 

status display (40).

 

•  If the symbol is filled out in black, satellites were 

found. 

•  If the symbol is not filled out, satellites are 

searched.

GPS position

•  Select the Number of Files menu item in the menu by pressing the 

Minus (32)

 

button.

The number of recorded files is displayed.

•  Select the 

Free Memory

 menu item in the menu by pressing the 

Minus (32)

button.

The free memory capacity is displayed.

Number of Files

Free memory

Содержание WELDPLAST 600









































Отзывы:

Нет отзывов