Leister GHIBLI AW Скачать руководство пользователя страница 25

Страница: 25 / 61

Warning

DANGER!

Danger when opening up the tool, as live components and

connections are exposed. Therefore, before opening it, unplug the tool to

ensure disconnection from the mains. Before putting into operation, check

power supply cord and connector as well as extension cable for electrical

and mechanical damage.

Incorrect use of the hot air tool (eg overheating of the material) can

present a

fire and explosion hazard

, especially near combus t ible

materials and explosive gases.

Do not touch the heating element housing, air nozzle and discharging

plastizised material when they are hot as they can cause

burns

. Let

the tool cool down. Do not point the hot air flow and the discharg ing

plastizised material in the direction of people or animals.

Caution

The

voltage rating

stated on the tool must correspond to the mains

voltage.

For personal protection on building sites we

strongly recommend

the tool be connected to a

RCCB

(

esidual

urrent

ircuit

reaker).

The tool must be operated

under supervision.

Heat can ignite

flammable materials which are not in view.The machine may only be

used by

qualified specialists

or under their supervision. Children

are not authorized to use this machine.

Protect tool from

damp

and

wet

Repairs

should only be carried out by

authorized Leister service

points

. Restricted to use with

original Leister accessories and

replacement parts

Warranty

• For this tool, the guarantee or warranty rights granted by the relevant distri-

butor/seller shall apply. In case of guarantee or warranty claims any manu-

facturing or workmanship defects will either be repaired or replaced by the

distributor at its discretion. Warranty or guarantee rights have to be verified by

an invoice or a delivery document. Heating elements shall be excluded from

warranty or guarantee.

• Additional guarantee or warranty claims shall be excluded, subject to mandato-

ry provisions of law.

• Warranty or guarantee shall not apply to defects caused by normal wear and

tear, overload or improper handling.

• Warranty or guarantee claims will be rejected for tools that have been altered

or changed by the purchaser.

Conformity

Leister Technologies AG, Galileo-Strasse 10, 6056 Kaegiswil/Switzerland,

confirms that this product, in the version as brought into circulation through
us, fulfils the requirements of the following EC directives.
Directives:

2006/42, 2014/30, 2014/35, 2011/65

Harmonized:

EN 12100, EN 55014-1, EN 55014-2, EN 61000-6-2,

Standards

EN 61000-3-2, EN 61000-3-3, EN 62233,

EN 60335-1, EN 60335-2-45, EN 50581

Kaegiswil, 17.10.2017

Bruno von Wyl, CTO

Christoph Baumgartner, GM

Translation of the Original User Manual

Applications

This hot-air tool is intended for all of the hot-air applications listed here, subject to compliance with safety regulations and the utilization of original Leister accessories:

• Welding of all thermoplastic synthetic materials

• Activation/detaching of solvent-free adhesives & hot melt adhesives • Soldering of copper pipes, solder connectors

& metal foils

• Welding of foils & plastic sheeting

• Thawing of frozen water pipes

• Shrinkage & forming of thermoplastic synthetic materials

• Drying of watery-moist surfaces

Deutsch
English
Français
Español
Português
Italiano
Nederland
Dansk
Svenska
Norsk
Suomi
Eλληνικά
Türkçe
Polski
Magyar
Česky
Slovensky
Românã
Slovensko
Български
Eesti
Lietuviu
Latviešu
Русский