Leica HDS6000 Скачать руководство пользователя страница 3

Страница: 3 / 144

Introduction

HDS6000

Symbols

The symbols used in this manual have the following meanings:

Trademarks

•

Windows is a registered trademark of Microsoft Corporation

•

Bluetooth is a registered trademark of Bluetooth SIG, Inc

All other trademarks are the property of their respective owners.

Type

Description



Danger

Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.



Warning

Indicates a potentially hazardous situation or an unintended
use which, if not avoided, could result in death or serious injury.



Caution

Indicates a potentially hazardous situation or an unintended
use which, if not avoided, may result in minor or moderate
injury and/or appreciable material, financial and environmental
damage.

)

Important paragraphs which must be adhered to in practice as
they enable the product to be used in a technically correct and
efficient manner.

Содержание HDS6000

















































































































































Результаты поиска

Содержание HDS6000

Отзывы:

Бренды по названию

Популярные бренды

Leica HDS6000, Руководство пользователя

Результаты поиска

Содержание HDS6000

Отзывы:

Бренды по названию

Популярные бренды