Leica DVM-series
Setup Manual
33
Maintenance
2
Remove the four screws, hold the knob (projection)
and detach the lamp holder.
3
Remove the lamp connector.
4
Remove two screws to detach the lamp fixing frame.
5
Remove the metal halide lamp from the lamp holder.
6
To mount a spare metal halide lamp, mount it in the reverse
order of steps 1 to 5.
• When mounting it, make sure that the indented section on the
metal halide lamp fits over the projection on the lamp holder.
• Insert screw A into the notch in the bottom of the lamp holder
and push the lamp frame (area B in the illustration) towards the
lamp before tightening the screw.
Lamp connector
Lamp fixing frame
Metal halide lamp
Screw
Screw
Knob (projection)
Lamp holder
Screw
