Leica DVM-series
Setup Manual
10
Editor’s Note
Page Format
Notational Conventions
In this manual, menu items displayed on the screen are enclosed with [ ].
Submenus are separated using “/”.
Visual Aids
Indicates points that are important to achieve the full product perfor-
mance, such as operational precautions and application procedures.
Indicates pages where related information can be found.
1
Header
Indicates the contents of the page.
2
Header (Header)
Given on page 2 and subsequent pages.
3
Cross-header
4
Overview
Describes the overview and operation flow of the section.
5
Illustration and screen
Shows illustration and screen relating to the operation procedure and
explanation.
6
Operation procedure and supplementary explanation
Explains the operation procedure and the status resulting from
execution of the operation. Helpful information regarding operation
and reference pages is introduced here using symbols.
Leica DVM-series
Setup Manual
22
Leica DVM-series
Setup Manual
23
Connecting Peripheral Devices
Connecting a Camera and Lens
Connecting Peripheral Devices
* The illustration shows MXF-10C.
ACS compatible lens
1
Insert the lens into the end of the camera head.
If a cap has been attached, remove it.
When attaching a lens that connects the fiber
cable directly, remove the fiber cable using the
hexagonal wrench (supplied with the lens).
For details, refer to the instruction manual of
the lens.
2
Turn the camera head mount dial.
3
Turn the lock screw to fix the lens to the camera
head.
1
Place the stand
mounting fixture to
the mounting position on
the stand.
2
Tighten the lens
mounting screw to
secure the lens to the
stand.
Attaching a Lens (Option) to the Camera
Connecting the Dedicated Cable of the ACS Compatible Lens (Option)
Insert the dedicated cable supplied with the ACS
compatible lens into the ACS connector on the KH-7700.
For the connection method for the ACS compatible
lens and dedicated cable, refer to the instruction manual
supplied with the lens.
Connecting the Camera Cable
Hold the camera cable plug with the slit facing up, insert the plug into
the connector, and then turn the screw to secure the plug.
To disconnect the plug, loosen
the screw and pull the plug out straight.
Connecting the Fiber Cable
Insert the fiber plug into the light source connector, and turn the fixing
ring to secure the fiber plug.
Mounting the Lens (Option) to the Stand (Option).
For the connection method for the ACS
compatible lens and dedicated cable, refer
to the instruction manual supplied with
the lens.
Fixing ring
Mounting position
Stand mounting fixture
Lock screw
Camera head mount dial
Lens
Camera head
Fiber cable
1
2
3
4
5
5
5
5
5
5
6
