Leica DVM-series
Setup Manual
3
Read and understand this Document
Please read and understand this document before using the products.
Please consult your Leica Microsystems representative if you have any
questions or comments.
Warranty
Leica Microsystems exclusive warranty is that the products are free from
defects in materials and workmanship for a period of one year (or other
period if specified) from date of sale by Leica Microsystems.
Leica Microsystems MAKES NO WARRANTY OR REPRESENTATION, EXPRESS
OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR
USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETER-
MINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS
OF THEIR INTENDED USE. Leica Microsystems DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
Limitations of Liability
Leica Microsystems SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT,
OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM
IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of Leica Microsystems for any act exceed
the individual price of the product on which liability is asserted.
IN NO EVENT SHALL Leica Microsystems BE RESPONSIBLE FOR WARRANTY,
REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS Leica
Microsystems’ ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY
HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO
CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR
REPAIR.
Suitability for Use
Leica Microsystems shall not be responsible for conformity with any stan-
dards, codes, or regulations that apply to the combination of products in
the customer’s application or use of the product.
At the customer’s request, Leica Microsystems will provide applicable
third party certification documents identifying ratings and limitations of
use that apply to the products. This information by itself is not sufficient
for a complete determination of the suitability of the products in combi-
nation with the end product, machine, system, or other application or use.
The following are some examples of applications for which particular
attention must be given. This is not intended to be an exhaustive list of
all possible uses of the products, nor is it intended to imply that the uses
listed may be suitable for the products:
Outdoor use, uses involving potential chemical contamination or electri-
cal interference, or conditions or uses not described in this document.
Nuclear energy control systems, combustion systems, railroad systems,
aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or govern-
ment regulations.
Systems, machines, and equipment that could present a risk to life or
property.
Please know and observe all prohibitions of use applicable to the
products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A
WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE Leica
Microsystems PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Performance Data
Performance data given in this document is provided as a guide for the
user in determining suitability and does not constitute a warranty. It may
represent the result of Leica Microsystems’s test conditions, and the users
must correlate it to actual application requirements. Actual performance
is subject to the Leica Microsystems Warranty and Limitations of Liability.
Change in Specifications
Product specifications and accessories may be changed at any time based
on improvements and other reasons.
It is our practice to change model numbers when published ratings or
features are changed, or when significant construction changes are made.
However, some specifications of the product may be changed without
any notice. When in doubt, special model numbers may be assigned to
fix or establish key specifications for your application on your request.
Please consult with your Leica Microsystems representative at any time to
confirm actual specifications of purchased products.
Dimensions and Weights
Dimensions and weights are nominal and are not to be used for manufac-
turing purposes, even when tolerances are shown.
Errors and Omissions
The information in this document has been carefully checked and is
believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
Programmable Products
Leica Microsystems shall not be responsible for the user’s programming of
a programmable product, or any consequence thereof.
Copyright and Copy Permission
This document shall not be copied for sales or promotions without permis-
sion. This document is protected by copyright and is intended solely for
use in conjunction with the product. Please notify us before copying or
reproducing this document in any manner, for any other purpose. If copy-
ing or transmitting this document to another, please copy or transmit it
in its entirety.
