Miscellaneous
Message displays
- 206 -
[Memory card parameter error]
●
The card is not of SD standard.
●
Use a card compatible with the camera.
•SD memory cards (8 MB to 2 GB)
•SDHC memory cards (4 GB to 32 GB)
•SDXC memory cards (48 GB, 64 GB)
[Read Error] / [Write Error] [Please check the card]
●
Data reading has failed.
→ Check whether the card has been inserted correctly
(→18)
.
●
Data writing has failed.
→ Turn off the camera and remove the card. Reinsert the card and turn the camera on again.
●
The card may possibly be damaged.
●
Try with a different card.
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
●
Format the card after saving necessary data on a PC etc.
(→42)
●
Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
●
If recording stops even when using a card of the recommended speed class
(→20)
, the data writing
speed drops. If this happens, we recommend backing up the data on the memory card and
formatting it
(→42)
.
●
Motion picture recording may be automatically terminated with certain cards.
[A folder cannot be created]
●
The folder numbers in use have reached 999.
→ Save the needed data on a computer or an other device, and then use [Format] on the camera
(→42)
.
The folder number is reset to 100 when performing [No.Reset]
(→38)
.
[Picture is displayed for 16:9 TV] [Picture is displayed for 4:3 TV]
●
The supplied AV cable is connected to camera.
→ To remove the message immediately → Press [MENU/SET].
→ To change the aspect ratio → Change [TV Aspect]
(→39)
.
●
The USB cable is only connected to camera.
→ A message disappears when cable is also connected to another device.
[This battery cannot be used]
●
Use a genuine Leica battery
(→8)
.
●
The battery is not identifiable by the camera due to dirty terminals.
→ Wipe any dirt away from the terminals.
[Recording failed.]
●
Recording may be impossible if the recording location for a 3D image is too dark/too bright, or if the
subject lacks contrast.
