Preparations
Using the [Setup] menu
- 35 -
•For the setting procedures of the menu.
(→25)
[Expo.Meter]
For selecting whether or not to display the setting display when e.g. shutter speed and
aperture value settings or Exposure Compensation are performed.
■
Settings: [ON] / [OFF]
●
If the setting display is not displayed, press the [DISP] button to switch the display of
the monitor.
●
The setting display will turn off if no operation is performed for approximately 4
seconds.
[Lens Resume]
For saving the zoom position and the Manual Focus position in the memory when the
camera is turned off.
■
Settings
[Zoom Resume]
[ON]:
Returns to the zoom position that was saved in the memory when the camera
is turned on the next time.
[OFF]
[MF Resume]
[ON]:
Saves the Manual Focus position in the memory when the camera is turned
[OFF] or when the focus selector switch is set to modes other than [ ]. This
setting will return to the focus position saved in the memory when the camera
is turned on or the focus selector switch is set to [ ] next time.
[OFF]
●
The Manual Focus position saved in the memory and the position to which the
camera returns when it is turned on may differ depending on the recording conditions.
[MF Assist]
This mode facilitates simple and precise manual focusing by enlarging a section of the
monitor image.
•About MF assist
(→105)
■
Settings: [ON] / [OFF]