Taking pictures
Using the [Rec] menu
- 140 -
•For the setting procedures of the menu.
(→25)
[Multi Expo.]
This mode allows you to combine two or three still pictures into a single one.
■
Settings
[Start]
Start taking pictures.
Decide on your composition and take the first picture
Press to select [Next] and then [MENU/SET]
•[Retake]: Delete the result of the last shot and take another picture.
•[Exit]: Exit Multi Exposure and save the picture that was taken.
Take the second and third pictures
•When you press [MENU/SET] while taking pictures, the pictures that
you took are saved and Multi Exposure is closed.
Use cursor buttons to select [Exit] and then press [MENU/SET]
[Auto Gain]
[ON]: Combines several pictures into one by automatically adjusting the
brightness in accordance with the number of pictures taken.
[OFF]: Combines several pictures into one by simply overlapping them
without any brightness adjustments.
Since this setting may create a combined picture that is too bright
for some situations, it may be advisable to set an Exposure
Compensation.
●
Still pictures are not saved in memory until Multi Exposure is ended.
●
Information for the picture taken last will be used as recording information of pictures
taken using Multi Exposure.
●
The resolution setting will be fixed at the point at which you select [Start].
●
The zoom position and White Balance are fixed at the point at which you take the first
picture.
●
There are some restrictions on the functions, for example, you will not be able to use
the following functions.
•[Burst Shooting]
•[i.Dynamic]
•[Auto Bracket]
•[Aspect Bracket]
•[WB Bracket]