Leica Geosystems RoadRunner, Техническое справочное руководство, Страница: 206 / 342

206 RoadRunner Managing the Road Job
8.3 Working with the Tasks (Advanced Mode)
Description When staking out or checking a road, it is often the case that it is not possible to finish a
particular task in one go. RoadRunner gives you the possibility of storing the element to be
staked out or checked together with all defined settings as a work task. Tasks are stored as
a part of the project.
Such tasks are also useful when working in a noisy and rough environment where it is not
possible to reflect on whether a particular parameter should be used or not. In this case, you
can define a task in the office and simply call-up the task in the field.
Every element defined for stake out or check, independent of whether it is a stringline, slope,
X-slope, crown, layer or DTM, may be stored as a task. Tasks are created in the same way
as elements are selected, during stake out or check. Refer to "4 Step 3 - Working in
Advanced mode" for more information on creating tasks using the selection wizard.
)
Tasks use the basic elements of every road job: stringlines. Deleting or modifying a stringline
used for a task automatically affects the task.
)
The seven last used tasks used on the project of each stake out/check type are remembered.
For example the stake out method
Stringline retains the last seven stringlines staked
out/checked in this project.