Leica BIOSYSTEMS CM3600 XP, Инструкция по эксплуатации

Страница: 73 / 86

73
Leica CM3600 XP
Operating the Leica CM3600 XP
7
7.10.2 Knife holder description
1
1
5
3
4
Fig. 81
( → Fig. 81) shows the knife holder in the
100 mm position of vertical height.
•
A groove ( → Fig. 83- 2 ) in the support columns
(
→
Fig. 83- 1 ) mark the 100 mm position. This
requires that the groove match the upper edge
of the knife holder, see (
→
Fig. 83) .
Warning
Under no circumstances can the knife holder be set to a lower position as this can cause serious
damage to the instrument.
Fig. 82
6
7
7
• Four knurled screws (
→
Fig. 82- 6 ) and four
clamping levers (
→
Fig. 82- 7 ) on the front hold
the knife holder in its position and enable a fast
height changeover (100 mm to 200 mm) on the
columns.
• The temperature sensor (
→
Fig. 84- 4 ) is
located on the side of the knife holder in this
version.