manualshive.com logo in svg

Leica BIOSYSTEMS CM3600 XP, Инструкция по эксплуатации, Страница: 83 / 86

Поделиться
Скачать
Leica BIOSYSTEMS CM3600 XP Скачать руководство пользователя страница 83

83

Leica CM3600 XP

Decommissioning and Disposal

11

11.  Decommissioning and Disposal

Warning 

The instrument or parts of the instrument must be disposed of according to existing applicable, local 

regulations. All objects contaminated with spilled reagents must be disinfected immediately with a 

suitable disinfectant to prevent spreading to other areas of the lab or to lab personnel.

Please comply with the Cleaning and Maintenance chapter and the Decontamination Declaration at the 

end of these Instructions for Use for notes on cleaning the Leica CM3600 XP.

The instrument can be contaminated when using biohazardous specimens. Thorough disinfecting is 

required before re-commissioning or disposal (e. g. multiple cleaning steps, disinfection or sterilization). 

Dispose of the instrument in compliance with the applicable laboratory specifications. Contact your Leica 

representative for more information.

Instrument components such as the computer, monitor, etc. that are labeled with the 

crossed-out dust bin are affected by the European Directive 2002/96/EC for Waste 

Electrical and Electronic Equipment (WEEE) of the European Parliament and the 

Council of January 27, 2003.

These objects must be disposed of via the collection points in accordance with the 

local regulations. More information on disposal of the instrument can be obtained from 

your local disposal company or your local Leica support staff.

Содержание CM3600 XP























































































Отзывы:

Нет отзывов