BD
A M610 LE
GIC L043-A03 2022-07-12 (GB)
6
Installation instructions:
• Do not use countersunk head screws when installing the locker lock.
• Flat headed screws (3,0 x 15 mm) are recommended for mounting the striker plate
(only included in single-set packaging).
• When installing the RFID reader on wooden and HPL doors, the screw heads must be sunk
completely in the door.
• A splash water and dust protection can only be ensured if the lock and the RFID reader lie
completely on the door surface (except Omega-profiles).
• The locker lock M610 is available in two versions (right or left mounting).
• Please ensure the correct installation position of the lock and the RFID reader.
• Tighten the screws hand-tight with max. 0.7 Nm.
Please note the different mounting positions and drilling pattern for the RFID readers.
M610
RFID reader L043-A03
with spacer
18
5,5
5,5
7
7
32
32
70
20
RFID reader L043-A03
without spacer
18
3,5
3,5
7
7
32
32
70
20
CAUTION:
- For mounting the RFID reader L043-A03
• without spacer please use drill holes of 5,5mm.
• with spacer please use drill holes of 3,5mm.
- Please countersink holes for screwheads for mounting the RFID reader.
✓
✓
✓
✓
✓
✓
23
94
94
27
,5
