BD
A M300 L043-A01 / -A02 2020-05-25 (GB)
4
OVERVIEW OF TRANSPONDER CARDS
As user cards, you can either use LEHMANN user cards or cards of a third-party provider complying with the sup-
ported transponders mentioned on page 2 under the technical specifications. Please note the following possible
restrictions when using user cards of third-party providers:
• The “Shared use“ operating mode is only possible with user cards from third-party providers if they have
the appropriate write permission for the user card.
• Transponder cards with a so-called “Random-UID“ are not supported.
Transponders from third-party providers must be checked for compatibility and reading distance in advance. For the
highest possible level of safety, transponder cards based on LEGIC advant are recommended.
Please note that installation cards, master cards, user cards and programming cards must be ordered separately.
Please keep the master and update cards as well as the card with the individual service key carefully and securely!
Card type
Description
Installation card
(only for assembly
and testing purposes)
The installation card can be used specially for assembly and testing purposes in order to
perform basic functions on the lock (opening and closing). Furthermore, the lock can be closed
using the installation card for transporting the furniture to its destination. This card is for
universal use. Any number of installation cards can be used at any lock. Prior programming of a
master card is not necessary. After a master card has been programmed for the first time, the
lock is disabled for the installation card. The use of an installation card is optional.
Master card
For complete commissioning, a master card must be programmed for both operating modes.
The master card is required for starting and terminating programming operations. This also
includes the programming of user cards in “Assigned use“ mode. The master card also enables
the so-called Facility Manager function and the emergency opening of the lock. A maximum of
one master card can be programmed per lock. You can use one master card for several locks.
User card
User cards are used to open and close the lock. In “Assigned use“ mode, up to 50 user cards
can be programmed on one lock. In “Shared use“ mode, one user card can be used temporarily
on one lock. It is possible to program one user card on several locks in “Assigned use“ mode,
and at the same time on one lock in “Shared use“ mode.
Programming card set
For certain programming functions, programming cards are required in conjunction with the
master card. The programming card set consists of 3 universal programming cards:
• P1: Mode (change of mode)
• P2: Sound (activating or deactivating acoustic signals)
• P3: Reset (reset to factory settings)
Update card
In addition to the master card, you will receive an update card. In conjunction with the master
card, the update card allows firmware updates to be loaded into this locking system
Service key
In addition to the master card and update card, you will receive a card with an individual
service key. Please keep the card with the service key carefully and securely. The printed service
key allows you to reorder master cards. It is not possible to reorder a master card without a
service key! This card has no electronic function!
