BD
A M300 L043-A01 / -A02 2020-05-25 (GB)
6
Klick
The motor unit (M-Box) and the electronic unit (E-Box) are not connected on delivery.
Please perform the following steps in order to get a functional unit.
Internal RFID reader L043-A01 (not possible for metal surfaces)
As an alternative to the standard mounting of the reader unit on the front side of the furniture, the RFID reader
L043-A01 can also be mounted on the inside. This is possible up to a wood thickness of max. 19mm. Please note that
the reading range between the transponder card and the RFID reader is then limited and light signals are no longer
visible. Please also note that an external power supply is only possible with an external RFID reader.
Please note the different mounting positions and drilling pattern for the RFID readers.
CAUTION:
- For mounting the RFID reader L043-A02
•
without spacer please use drill holes of 5,5mm.
•
with spacer please use drill holes of 3,5mm.
- Please countersink holes for screwheads.
- Tighten the screws hand-tight with max. 0.7 Nm.
60
18
5,5
5,5
7
7
32
32
107
60
18
5,5
5,5
32
32
107
RFID reader L043-A01
RFID reader L033-A02
without
spacer
RFID reader L033-A02
with
spacer
60
18
3,5
3,5
7
7
32
32
107
60
82
32
42
32
26
40
M300
