BD
A M300 L043-A01 / -A02 2020-05-25 (GB)
9
GETTING STARTED AND CHANGING BATTERIES
Make sure that the lock and the RFID reader are correctly connected to each other with the connecting cable.
Make sure that the connections between the plugs and sockets are properly aligned. Open the battery compartment
cover by loosening the screw. Then place the batteries in the lock. Make sure that the batteries are correctly inserted
in the battery compartment and wait until a long acoustic signal and at the same time an optical signal (yellow) are
given.
Close the battery compartment cover and screw in the fixing screw.
Then program the lock in accordance with these operating instructions.
Once the programming operation is completed, ensure that the system is functioning correctly.
CAUTION:
Use only LR6, AA, alkaline type batteries. Rechargeable batteries, zinc-carbon batteries or lithium
batteries are not permitted!
TIPS FOR THE FOLLOWING PROGRAMMING STEPS
The last 5 seconds before the shutdown of the programming process are announced by the flashing of a yellow lamp
and acoustic signals. The visual and acoustic signals are differentiated as follows.
Optical signals
Short flashing
Long flashing
Acoustic signals
Short
Long
Inserting the batteries
Batteries are inserted correctly in the battery
compartment. Initialisation takes place. During initia-
lisation, no transponders should be placed within the
read range of the RFID reader.
about 3 seconds
