22
4. Before the engine starts, prepare the aircraft with nose 10/15° UP
5. Launch the aircraft by transmitting energy to it (like shown in the training video), keeping
your arm straight
WARNING
: You can stop the process any time by tilting the aircraft DOWN 90°
During the flight
WARNING
: Always monitor the aircraft during the flight in order to be able to recover it
easily in case of aborted flight. If the aircraft for any reason goes below 50 meters of height,
it will make a BEEP and the engine will stop for security reason (15m when “Allow low
Altitudes” is selected in the General Settings option)
After the launch you will have around 4-5 minutes before the aircraft will land automatically
if you don’t activate the mission (LA200/LA300). During this time L-A Series aircraft follows a
set-up trajectory at 100 meters height and around 200m radius to capture the best footage
around you.
Launching the mission
For security reasons, if you are not doing any action after take-off, LA200 and LA300 will
automatically follow the LA100 flight path, with a 200m radius circle, and land automatically
after 4 minutes 50 seconds of flight time.
To enable the aircraft to activate its flight path (the one that is on the NAV screen of
OperationCenter) and let it go to the first waypoint, follow this procedure:
Go mission procedure
1. Always be on the FLY page when launching the aircraft.
2. At any time between the take-off and the 100m altitude, you can CANCEL the mission
INSTANTLY by clicking on LEFT AND RIGHT “CANCEL MISSION” buttons AT THE SAME TIME. If
you are cancelling the mission, the aircraft will stop its engine and will come back to land by
gliding near the take-off point. If you are clicking only on one button (left or right), the
mission will not be cancelled.
