16
CAUTION
: if your battery is too low discharged, this screen could show you a LiPo = 2 cells
screen. You can adjust this parameter with the DEC and INC buttons.
Then click on the ENTER button to begin the charge.
Step 3: control the charge
During the charge, you will see on the screen few parameters.
On the center (first line), it will show the actual intensity of the charge.
On the right part is indicated the real voltage level of the battery. At the end of the charge,
voltage should be around 12.56V.
On the second line, you can check the total charge time, and the amount of energy that was
already put in the battery (maximum is the battery total capacity, but in reality you will always
put less than that during a charge).