29
STOPPING OPERATION
After concluding operation:
1.
Lower the booms down to transport position.
2.
Lift the outriggers completely up to transport position.
3.
Turn the ignition key to the ‘0’ position and take it with you.
4.
Remove safety harnesses from the platform and take them with you (harnesses must be
kept in their place and in their box/package).
5.
Turn the main ignition key to the horizontal position and take it with you.
6.
Close the fuel faucet (see the engine manufacturer’s manual).
7.
If the machine stays in a place where it can be connected to a 230VAC mains current, it
is recommended to leave it connected to charge the battery (e.g., overnight). The
battery charges even when the main power switch is engaged.
NOTE! Prevent unauthorised use of the access platform!
