19
Emergency lowering button at ground level and slewing release
230 V connections and switches
1.
Emergency lowering, lower boom
2.
Emergency lowering, upper boom
3.
Slewing release lever
1
2
3
1.
230V 50Hz, 16A connection cable, output either on the
side or at the back (electric engine model)
2.
Residual current device switch. The residual current
device switch must be in the ON position to prevent all
230V devices, including sockets, from working. The
functioning of the RCD unit, along with power supply
from the network, can be tested by pressing the TEST
button in the unit. If the RCD unit is not activated by
pressing the TEST button, either the RCD unit is faulty or
the connection cable does not carry a voltage.
3.
Battery charger. Two Led indicators indicate the battery
level. These indicator lights can be checked through the
netting at the front of the machine.
Yellow = battery level low,
green = battery almost fully charged
Green = battery fully charged / trickle charge
1
2
3
