20
Lower control switches (optional)
Functioning of the lower control:
1.
The ignition key on the platform must be turned to the ‘power on’ position.
2.
The control mode - the platform or the lower controls - is selected with the selection
switch. The machine can only be controlled from a single control panel at any given
time.
3.
When the lower control panel is selected, the machine can be switched on and off from
the ignition on the lower panel.
4.
Except for the platform self-levelling, the boom can now be controlled with the lower
boom control lever.
When the work takes place in an area that is open to the public, the control selection ignition key
should be removed to prevent unauthorised use and the machine can only be used from the
platform.
NOTE! The emergency stop buttons of the lower control and platform panels
function regardless of which control mode is selected.
1.
Emergency stop
2.
Ignition; stop - power on - start
3.
Selection of the control position; upper control - lower
control
4.
Overload warning light
5.
1st boom control lever
6.
2nd boom control lever
7.
Boom slew control lever
8.
Telescope boom control lever
1
2
3
4
6
7
8
5
