Leguan 125, Руководство оператора и по обслуживанию

Страница: 18 / 39

18
_________________________________________________________________________________________
7. STARTING THE ENGINE / ELECTRIC MOTOR
Read carefully this Operators Manual and also the Operators Manual for the engine before
starting operation. Read and understand all safety instructions before starting operation.
It is the operator’s responsibility to follow all operating and safety instructions
.
This access platform is destined for lifting of persons and additional load only. Lifting of
materials is unsafe and not allowed.
If several persons are operating this machine during the same work shift, all of them must be
trained and they must follow all operating and safety instructions.
1. Switch on the battery disconnect switch.
2. When using the electric motor connect the 230V cable and check also function
of residual current device. With the TEST button you can also check that there
comes 230V to the machine.
3. Make sure that the booms are down in transport position. If necessary, press on
the emergency lowering buttons one by one.
4. Check emergency stop switch; release by turning the switch if it is switched on
5. Fasten safety harnesses on the fastening points at platform mounting bracket
and close the gate.
6. Select propelling with the switch no. 5 at platform (electric motor/combustion
engine, see page 14) and select slower drive speed (switch no. 4 at platform).
7. Adjust hand throttle lever of the engine ( no. 1) to about ¾ throttle.
8. If ambient temperature is below +5ºC press on the choke button when starting.
9.
Start the engine/motor by turning the ignition switch to the right, to ”Start”.
10. Once the engine has started reduce throttle to desired engine revs level.
ATTENTION! The engine must always be stopped with the ignition switch.
1