Vaddio is a brand of Legrand AV Inc.·
· Phone 800.572.2011 / +1.763.971.4400 ·
Fax +1.763.971.4464 · Email
·
Vaddio is a registered trademark of Legrand AV Inc. All other brand names or marks are used for
identification purposes and are trademarks of their respective owners. All patents are protected under
existing designations. Other patents pending.
©2021 Legrand AV Inc.
Powering Up the Equipment
Power up the connected equipment that is not powered by the OneLINK device (such as displays and
third-party control devices), then connect power to the OneLINK device. The connected camera and the
OneLINK device power up together.
Next Steps
The OneLINK device is now ready to configure and use. This information is available in the
Complete
Manual for the OneLINK Bridge AV Interface
.
Operation, Storage, and Care
For smears or smudges on the product, wipe with a clean, soft cloth. Use a lens cleaner on the lens. Do
not use any abrasive chemicals.
Keep this device away from food and liquids.
Do not operate or store the device under any of the following conditions:
n
Temperatures above 40°C (104°F) or below 0°C (32°F)
n
High humidity, condensing or wet environments
n
Inclement weather
n
Severe vibration
n
Lateral acceleration of more than 27G
n
Dry environments with an excess of static discharge
Do not attempt to take this product apart. There are no user-serviceable components inside.
Installation Guide for the OneLINK Bridge AV Interface
