LEGRAND PDU, Руководство пользователя

Страница: 57 / 505

Ju
ne
20
18
Legrand PDU User Guide 57
Port Used for...
USB-A
This is a "host" port, which is powered, per USB 2.0 specifications.

Connecting to an iOS mobile device for viewing or configuring the
Legrand PDU. See
Connecting a Mobile Device to Legrand PDU
(on
page 26).

Connecting a USB device, such as a Logitech ® webcam or wireless
LAN adapter.

Cascading Legrand PDUs for sharing a network connection.
CONSOLE
(RJ-45)
Establishing a serial connection between the Legrand PDU and a computer
for accessing the command line interface..
You need a third-party RJ-45 to DB9 adapter/cable for the connection. See
RJ45-to-DB9 Cable Requirements for Computer Connections
(on page
31).
SENSOR
(RJ-45)
Connection to one of the following devices:
 Raritan's environmental sensor package(s).
 Raritan's sensor hub, which expands the number of a sensor port to
four ports.
ETH 10/100,
ETH 10/100 Legrand PDU has two Ethernet ports, supporting up to 100 Mbps.
Connecting the Legrand PDU to your company's network via a standard
network patch cable (Cat5e/6). This connection is necessary to administer
or access the Legrand PDU remotely.
There are two small LEDs adjacent to the port:
 Green indicates a physical link and activity.
 Yellow indicates communications at 10/100 BaseT speeds.
You can use either Ethernet port for network connection or cascading. See
Extended Cascading with Legrand PDUs
(on page 35).
Note: Connection to this port is not required if wireless connection is
preferred, or if the Legrand PDU is a slave device in the cascading
configuration. See
Cascading Multiple Legrand PDUs for Sharing
Ethernet Connectivity
(on page 32).
Front Panel Display
The following diagram shows the dot-matrix LCD display panel on Zero U models.