LEGRAND PDU, Руководство пользователя, Страница: 405 / 505

Ju
ne
20
18
Legrand PDU User Guide 405

Specify a match condition for identifying a line or one Legrand PDU device in the device configuration file
"devices.csv."
The option's value comprises one word and one number as explained below:
 The word prior to the colon is an identification property, which is either
serial
for serial number or
mac
for MAC address.
 The number following the colon indicates a column in the
devices.csv
file.
For example,
mac:7
instructs the Legrand PDU to search for the MAC address in the 7th column of the
"devices.csv" file.

The default value is
serial:1
, making the Legrand PDU search for its serial number in the first column.

This option is used only if the "device_list" option has been set.

factory_reset

If this option is set to
true
, the Legrand PDU will be reset to factory defaults.

If the device configuration will be updated at the same time, the factory reset will be executed before
updating the device configuration.

bulk_config_restore

Specify the name of the bulk configuration file used to configure or restore the Legrand PDU.
Note: See
Bulk Configuration
(on page 239) for instructions on generating a bulk configuration file.

Additional configuration keys set via the
config.txt
file will be applied after performing the bulk restore
operation.

This option CANNOT be used with the option "full_config_restore."

If a firmware upgrade will be performed at the same time, you must generate the bulk configuration file
based on the NEW firmware version instead of the current firmware version.

full_config_restore

Specify the name of the full configuration backup file used to restore the Legrand PDU.
Note: See
Backup and Restore of Device Settings
(on page 243) for instructions on generating the full
configuration backup file.

Additional configuration keys set via the
config.txt
file will be applied after performing the configuration
restore operation.

This option CANNOT be used with the option "bulk_config_restore."

If a firmware upgrade will be performed at the same time, you must generate the full configuration
backup file based on the NEW firmware version instead of the current firmware version.

collect_diag

If this option is set to
true
, the diagnostic data of the Legrand PDU is transmitted to the USB drive.

The filename of the diagnostic data written into the USB drive is:
diag_<unit-serial>.zip

switch_outlets

This feature works on outlet-switching capable models only.

Switch on or off specific outlets.

The option's value comprises outlet numbers and the setting "on" or "off" as explained below:

Each "on" or "off" setting consists of three parts: outlet numbers, a colon, and the word "on" or "off".
 Each "on" or "off" setting is separated with a semicolon.
 If all outlets will share the same "on" or "off" setting, replace the outlet numbers with the word "all".

Examples:

Turn on outlets 1 to 3, and 10, and turn off outlets 4 to 9.