LEGRAND MIDDLE ATLANTIC FlexView 800 Series, Инструкция

Страница: 9 / 18

UNDERSTANDING SOME OPERATIONAL ITEMS
Resetting the Electric Lift Actuator
If the electric lift mechanism does not
respond after pressing the UP arrow
button, reset the actuator by pressing
and holding the DOWN arrow button
until the unit is completely lowered,
and then pressing and holding the
DOWN arrow button for an additional
3 seconds. ( FIGURE C )
NOTE
: The reset steps are also on
the product label for convenience.
NOTE:
• If your FlexView cart makes
unusual noise or smells, switch off
the mains voltage immediately.
• Inspect cables for any damage.
• Before cart is moved, unplug the
mains cable to installed equipment.
FIGURE C
Page 9
4. Use power driver, socket, and (4x) nuts from the previous steps to
install a leveling foot (A) to the bottom of your cart. (
FIGURE C
)
5. Repeat the process to install all 4 leveling feet to your cart.
6. Make initial adjustments to the leveling feet by tightening (retracting) or
loosening (extending) them as necessary.
7. Place level on horizontal bracket and tighten either the top
display leveling screw to make a clockwise (facing) fine adjustment or the bottom leveling screw for
a counterclockwise adjustment until your display is level.
FIGURE C
Leveling Foot
INSTALLING THE LEVELING FEET (CONTINUED)
NOTE : Adjust torque on power driver to lightest setting and only increase as necessary.