LEGRAND MIDDLE ATLANTIC FlexView 800 Series Скачать руководство пользователя страница 5

Page 5

When using an electrical furnishing, basic precautions should always be followed, including the

following:

• 

For institutional use.

• 

Read and follow all instructions before using.

• 

WARNING – Death or serious injury may occur when children climb on audio and/or video equipment furniture.

 

A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result the

 

furnishing may tip over on the child.

• 

WARNING – Relocating audio and/or video equipment to furniture not specifically designed to support audio and/or

 

video equipment may result in death or serious injury due to the furnishing collapsing or over turning onto a child.

• 

DANGER – To reduce the risk of electrical shock:

 

Always unplug this furnishing from the electrical outlet before cleaning.

• 

WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

1.  Unplug from outlet before putting on or taking off parts.

2.  Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.

3.  Use this furnishing only for its intended use as described in these instructions.  Do not use attachments not

 

recommended by the manufacturer.

4.  Never operate the furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or

 

damaged, or dropped into water.  Return the furnishing to a service center for examination and repair.

5.  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

 

where they exit from the apparatus.

6.  Keep the cord away from heated surfaces.

7.  Never operate the furnishing with the air openings blocked.  Keep the air openings free of lint, hair, and the like.

8.  Never drop or insert any object into any opening.

9.  Do not use outdoors.

10.  Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

11.  To disconnect, turn all controls to the off position, then remove plug from outlet.

12.  For chairs and similar furnishings with movable parts such as foot supports the following statement:

 

WARNING: Risk of Injury – Keep children away from extended foot support (or other similar parts).

13.  WARNING: Risk of Electric Shock – Connect the furnishing to a properly grounded outlet only.

 

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one

 

wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third

 

prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement

 

of the obsolete outlet.

14.  For loading always put heavier items at the bottom and not near the top in order to help prevent the possibility of the

 

furnishing tipping over.

15.  Each surface is intended to support a load shall have a corresponding statement in the use instructions specifying the

 

maximum intended load for the surface in pounds and (kilograms). 

16.  WARNING: The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as

 

vases, shall be placed on the apparatus"

17.  The mains plug is used as your disconnect device.  This device shall remain readily operable.

18.  Clean only with dry cloth.

19.  Unplug this apparatus during lightning storms or when unused for long periods of time.

20.  Only use attachments/accessories specified by the manufacturer.

21.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any

 

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,

 

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

  SAVE ALL INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Содержание MIDDLE ATLANTIC FlexView 800 Series



















Отзывы: