manualshive.com logo in svg

LEGRAND MIDDLE ATLANTIC FlexView 800 Series, Инструкция

Поделиться
Скачать
LEGRAND MIDDLE ATLANTIC FlexView 800 Series Скачать руководство пользователя страница 7

Page 7

SUPPLIED COMPONENTS AND HARDWARE

Interface Brackets

VESA 800 Display

Adapter Brackets

If any pieces are missing or damaged, please report it immediately to Technical Support at 

[email protected] or (866) 977-3901.

(20x)

#6 Washer 

For Mounting

Small-Screw 

Components

to Lever Lock

(2x)

10-32

Flange Nut

(3x)

Plastic

Lever Lock

Locking Rivet

(2x)

Key

(12x)

Wire Tie

(8x)

Cable 

Management 

Clip

(2x)

2” Lever Lock

Channel

NOTE

: Pre-Installed Inside 

FlexView Conferencing Cart

10” Lever Lock™

Plate

NOTE

: Pre-Installed Inside 

FlexView Conferencing Cart

(8x)

8-32

Pan Head 

Screw

(2x)

10-32 x ¾”

Interface Bracket 

Locking  Screw

(8x)

10-32 x ¾”

Truss Head Screw

(8x)

5/16-18

Flange Nut

WEIGHT RATINGS

240 lbs. (109 kg) 190lbs max total outside load + 50lbs max inside load

50 lbs. (23 kg) Maximum Total Rated Load

175 lbs. (79 kg) Maximum Total Rated Load

20 lbs. (9 kg) Maximum Total Rated Load

20 lbs. (9 kg) Maximum Total Rated Load

190 lbs. (98 kg) Maximum Total Rated Load

Item

Weight Rating

FlexView Conferencing Cart 

Inside of FlexView Conferencing Cart 

Display (40" (1016 mm) to 90" (2286 mm), Not Included)

Camera (Not Included)
Soundbar (Not Included)
Display
(Including any customer-provided devices on optional camera mount and/or soundbar mount)

WARNING

: This product is intended for use only with the products and maximum weights indicated. Use with other products or 

products heavier than the maximum weights indicated may result in instability causing possible injury. Total equipment weight must 

not exceed the amounts indicated on the previous table.

AVERTISSEMENT

: Ce produit est destiné à être utilisé uniquement avec les produits et les poids maximum indiqués. L'utilisation 

avec d'autres produits ou produits plus lourds que le poids maximum indiqué peut entraîner une instabilité pouvant causer des 

blessures. Le poids total de l'équipement ne doit pas dépasser les quantités indiquées dans le tableau précédent.

(4x)

Leveling Foot

and Plate

Содержание MIDDLE ATLANTIC FlexView 800 Series



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды