LEGRAND MIDDLE ATLANTIC FlexView 800 Series, Инструкция

Страница: 13 / 18

Page 13
4. Slide display sideways until interface bracket hooks drop into
notches along the lower rim of the
horizontal mounting bracket.
( FIGURE L )
NOTE: Several notch locations
are provided for horizontal
position adjustment.
WARNING:
Do not release your display until certain the top hook of each interface bracket is
securely seated on the upper rail of the horizontal mounting bracket.
AVERTISSEMENT: Ne relâchez pas votre écran tant que le crochet supérieur de chaque
support d'interface n'est pas fermement installé sur le rail supérieur du support de montage
horizontal.
Notches on Horizontal
Mounting Bracket
FIGURE L
5. Press the UP arrow button and raise your display to
the highest position. For more information, see
“Understanding Some Operational Items” on page 9.
6. Raise both locking brackets to their highest position and
then use power driver, #2 Phillips bit, adjustable wrench,
(2x) 10-32 x ¾” interface bracket locking screws and
(2x) 10-32 flange nuts to secure them in place.
( FIGURE M
7. Use #2 Phillips screwdriver to loosen (2x) pre-installed
display leveling screws as shown. ( FIGURE N )
8. Use slotted screwdriver or 5/16” socket and wrench to
loosen (3x) pre-installed display bracket screws.
Interface Bracket
Locking Screws
Flange Nuts
FIGURE M
ATTACHING YOUR DISPLAY ONTO THE HORIZONTAL MOUNTING BRACKET (CONTINUED)