LEGRAND CHIEF XSD1U, Руководство по установке

Страница: 18 / 24

XSD1U Installation Instructions
18
10. Repeat Steps 5 through 8 for Right side vertical mounting
bracket using the same hole locations to align brackets
horizontally.
11. Determine and mark the horizontal center position between
the Left and Right TOP mounting holes in display.
(See Figure 35)
12. Determine and mark the horizontal center position between
the Left and Right BOTTOM mounting holes in display. (See
Figure 35)
13. Orient upper horizontal mounting bracket (TQ) so that
flanges are facing towards display and resting in recessed
area of left and right vertical mounting brackets (TR). (See
Figure 35)
14. Adjust Upper horizontal mounting bracket (TQ) position until
center diamond in horizontal mounting bracket (TU) aligns
with mark made in Step 11, and mounting holes and slots in
horizontal mounting bracket (TQ) are aligned with threaded
holes in mounting tabs of left and right vertical mounting
brackets (TR). (See Figure 35) and (See Figure 36)
15. Use 1/8" hex key (TP) to secure upper horizontal mounting
bracket (TQ) to left and right vertical mounting brackets
(TR) using four button head flanged screws (TN). (See
Figure 36)
16. Repeat Steps 12 through 15 for lower horizontal mounting
bracket (TQ).
IMPORTANT ! :
The orientation of, and mounting holes used,
when installing the lower horizontal mounting bracket must be
the same as the upper horizontal mounting bracket. Vertically
align upper and lower brackets by aligning holes or end of slots.
(See Figure 36)
IMPORTANT ! : Whenever possible install mounting
screws diagonally as shown in detail in Figure 35.
Figure 35
12
11
(TR) x 2
Center Mark
(TQ) x 2
Figure 36
15
15
(TQ) x 2
(TR) x 2
(TN) x 8
(TR) x 2
14