LEGRAND CHIEF XSD1U Скачать руководство пользователя страница 17

Страница: 17 / 24

Installation Instructions

XSD1U

WARNING:

IMPROPER INSTALLATION CAN LEAD TO

MOUNT FALLING CAUSING SERIOUS PERSONAL

INJURY OR DAMAGE TO EQUIPMENT! DO NOT substitute

hardware. Only use hardware provided or specified by

manufacturer.

Determine and mark the vertical center position between

the Left side Upper and Lower mounting holes in display.

(See Figure 32)

Determine and mark the vertical center position between

the Right side Upper and Lower mounting holes in display.

(See Figure 32)

Figure 32

Orient vertical mounting bracket (TR) so that mounting

holes are on top and mounting slots are on bottom. (See

Figure 32)

Align mounting holes in vertical mounting bracket (TR) with

upper and lower mounting holes in display.

Adjust vertical mounting bracket (TR) position until mark

made in Step 1 aligns with center mark in vertical mounting

bracket (TR)

Select correct screws, nesting spacers (if necessary) and

universal washers (if required) from the hardware bag (TA-

TM) and attach brackets to back of screen. (See Figure 34)

IMPORTANT ! :

The M8 screws do

NOT

require a

washer. Use the universal washer (TMB) only with M4,
M5 and M6 screws.

NOTE:

The nesting spacers (TMA) may be used separately, or

put two together in different configurations to create
different size spacers. (See Figure 33)

Figure 33

If the display has a recessed mounting surface, protrusions

or a power box, a spacer and longer mounting hardware

must be placed between the display and vertical mounting

bracket (TR). (See Figure 34)

(TR) x 2

Mounting holes

Mounting Slots

(Single)

(Nested)

(Stacked)

0.375

[9.5]

0.563

[14.3]

0.750

[19.1]

Figure 34

(TR) x 2

(TMA) x 4

(TA through TL)

x 4

(TMB) x 4

(TR)

Содержание CHIEF XSD1U

























Результаты поиска

Содержание CHIEF XSD1U

Отзывы:

Бренды по названию

Популярные бренды

LEGRAND CHIEF XSD1U, Руководство по установке

Результаты поиска

Содержание CHIEF XSD1U

Отзывы:

Бренды по названию

Популярные бренды