LFE1U
Installation Instructions
14
10. Place wall brackets (B1) over anchors and align mounting
slots on mount with holes in anchors. (See Figure 21)
11. Install four 5/16-18 x 3 3/4" Phillips pan machine screws (M)
through 3/16 washers (N) and slots on wall bracket (B1) and
into toggler anchors (L). (See Figure 21)
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
EQUIPMENT FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Overtightening of
mounting hardware can damage the steel studs. DO NOT
overtighten mounting hardware!
12. Position column assembly (P) inside two installed wall
brackets (B1). (See Figure 21)
Figure 21
13. Install four 5/16 x 1/2” button head cap screws (X) through
slots on wall brackets (B1) and side of column assembly (P).
(See Figure 22)
Figure 22
Installing to a Concrete Wall
1.
Measure 5 5/8" off the finished floor to mark lower mounting
locations and 32 5/8" off the finished floor for upper
mounting locations. Holes must be 4" apart horizontally.
2.
Mark hole locations at each mounting location. (See Figure
23)
3.
Drill four 3/8” holes at marked hole locations. (See Figure
23)
Figure 23
4.
Install four concrete anchors (R) into drilled holes. (See
Figure 24)
5.
Use four 5/16 x 2 3/4" flange head screws (Q) to secure two
wall brackets (B1) to wall. (See Figure 24)
Figure 24
11
(M) x 4
(N) x 4
12
(X) x 4
13
(P)
X
X
X
X
5 5/8
” ab
ove
finis
hed
floo
r
32 5
/8” a
bove
finis
hed
floo
r
4” a
part
4” a
part
3/8"
3
5
(Q) x 4
(R) x 4
4
Содержание Chief LFE1U
Страница 19: ...Installation Instructions LFE1U 19 ...