LEGRAND CHIEF KITXWXSM1U, Руководство по установке

Страница: 12 / 16

KITXWXSM1U Installation Instructions
12
Roll/Height Adjustment of Wall Brackets
NOTE:
The height adjust wall brackets allow adjustment of
+ 1/2" (12.7mm).
1. Turn to right (tighten) to raise side of screen. (See Figure 18)
2. Turn to left (loosen) to lower side of the screen.
Figure 18
Backwards Angle Compensation
The mount may be slightly adjusted to help compensate for the
forward tilt of a heavy screen.
NOTE:
The interface brackets (W and X) ship in the 0° tilt
position. (See Figure 19)
1. With interface brackets in CLOSED position (See Figure
14), remove two fasteners holding tilt compensation in place
on each interface bracket (W and X). (See Figure 19)
2. Adjust interface bracket for -1° or -2° back tilt, as required.
(See Figure 19)
3. Tighten two fasteners (removed in Step 1). (See Figure 19)
Figure 19
Locking Screen Interface Brackets (Optional)
1. Lock screen interface brackets onto mount rails using one
3/8-16 x 3/4" set screw (P) on each interface bracket. (See
Figure 20)
Raises screen
Lowers screen
1
2
(Screen not shown for clarity)
(N)
(V and W)
3
1
Fasteners set at
-1° back tilt
Fasteners set at
-2° back tilt
Fasteners set at
0° back tilt
(Ships in this position)