52
Notes:
- In motion detection mode, you cannot use copy / paste to set channel setup since the video in each channel may not
be the same.
- To activate motion detection go to MAIN MENU -> SETTING -> SCHEDULE and select “MD” or “MD Alarm” for “Channel”
and “Period”.
2) Video Loss
In Detect menu, select “Video Loss” from the type list. You can see the interface below. This function allows you to be
informed when video loss phenomenon occurred. You can enable alarm output channel and then enable show message
function.
Tips:
You can enable preset activation when video loss occurs.
Refer to “Motion Detection” functions for detailed information.
3) Camera Masking
When someone viciously masks the lens, or the output video is in one-color due to the environments light change, the
system can alert you to guarantee video continuity.
Tips:
You can enable preset activation when camera masking occurs.
Please refer to “motion detection” function for detailed information.
Note:
In Detect interface, copy / paste function is only valid for the same type, which means you cannot copy a channel setup in
video loss mode to camera masking mode.
5.5.8 Pan / Tilt / Zoom
Refer PTZ Setup to chapter 4.8
