43
5.5.4 RS232
RS232 interface is shown below. There are five items. See below
1 - Function:
You can select various devices.
2 - Baud rate:
Select the proper baud rate.
3 - Data bit:
You can select proper data bit. The value ranges from 5 to 8.
4 - Stop bit:
There are two values: 1 / 2.
5 - Parity:
There are five choices: none / odd / even / space / mark.
System default setup is:
•
Function: Console
•
Baud rate:115200
•
Data bit:8
•
Stop bit:1
•
Parity: None
After completing all the setups please click on the “Save” button, system goes back to the previous menu.
5.5.5 NETWORK
You can input network information. See below.
1 - IP address, Subnet Mask
and the Gateway: here you can input the IP address.
2 - DHCP:
it is to auto search IP. When enable DHCP function, you cannot modify IP / Subnet mask /
Gateway. These values are from DHCP function.
If you have not enabled DHCP function, IP / Subnet mask / Gateway display as zero.
You need to disable DHCP function to view current IP information.
Besides, when PPPoE is operating, you cannot modify IP / Subnet mask / Gateway.
3 - TCP port:
Default value is 37777.
1
2
3
4
5
1
3
4
7
8
9
10
2
6
5
