LEGRAND 0 625 14 Скачать руководство пользователя

Страница: 8 / 11

8/11

Technical data sheet: S000082102EN-1

Updated: 08/10/2013

Created: 08/10/2013

Cat. No(s): 0 625 14/24/54/64/74

Kickspot Self-testing/AutoDiag

self-contained emergency lighting unit

4. USE

4.1 Switch-on/Standby state

The white emergency LED(s) come on at low intensity and the green unit

status LED comes on.

Note: The green self-test indicator flashes for the first 28 hours.

4.2 Mains supply break/Emergency operation

0 625 14/24/54/74: The green unit status LED goes off and the white

emergency LEDs come on at higher intensity.

0 625 64: The white LED and the green unit status LED go off and all

4 emergency LEDs come on.

4.3 Setting to rest state via the remote control

Cat. Nos. 0 039 00/01

After the normal lighting is switched off intentionally:

Pressing the

button sets the unit to rest state to prevent the battery

discharging.

Normal lighting switched back on:

The unit automatically returns to standby.

4.4 Automatic checking of the unit status (self-testing system)

This unit automatically checks its operating status.

Once a week:

Switches to emergency state and tests for 15 s, and tests switch-on and

the light sources.

Once every three months:

Switches to emergency state for one hour and tests the battery standby

power. Tests the light sources and the duration of the standby battery

power.

4.5 Result of the automatic checks

LEDs

Unit

Battery

fault

Electronic

fault

Green

(steady or

flashing)

Yellow

(steady)

(rapid flashing)

The time of the tests is set at the time the unit is first switched on. The

day of the test is chosen randomly in order to ensure that a minimum

number of units are tested at the same time.

The time at which all the units are tested can be changed to the required

time by simultaneously pressing the

and

buttons on the remote

control.

This change of test time triggers a standby power test immediately or

within 24 hours.

4.6 Stopping a test in progress

If a standby power test hinders operation, it can be stopped immediately.

Press the OFF button on the remote control unit Cat. No. 0 039 00. The

test is stopped and postponed until the following day.

4.7 Special cases

When the unit has been switched off for more than 3 days, the tests are

no longer carried out. The test cycle will resume after the unit is switched

back on and the batteries have been recharged. The tests planned for

the day the unit is switched back on are automatically postponed for 24

hours.

4.8 Operation of self-contained emergency lighting + home

lighting unit Cat. No. 0 625 14 with a remote control module Cat. No.

0 039 00 connected to a fire alarm control panel

Mains power

supply

Fire alarm

Unit status

Emergency

function

Home

function

Present

Absent

Standby

Absent

Backup

Rest

Backup

Absent

Present

Backup

Present

Present or

absent

Standby

Lighting

unit standby

and emergency

LEDs

Unit green

status LED

Home

lighting unit

emergency

LEDs

Yellow

fault LED

4 s

Содержание 0 625 14












Результаты поиска

Содержание 0 625 14

Отзывы:

Похожие инструкции для 0 625 14

Бренды по названию

Популярные бренды

LEGRAND 0 625 14, Руководство пользователя

Результаты поиска

Содержание 0 625 14

Отзывы:

Похожие инструкции для 0 625 14

Бренды по названию

Популярные бренды