LEGRAND 0 625 14 Скачать руководство пользователя страница 10

Страница: 10 / 11

10/11

Technical data sheet: S000082102EN-1

Updated: 08/10/2013

Created: 08/10/2013

Cat. No(s): 0 625 14/24/54/64/74

Kickspot Self-testing/AutoDiag

self-contained emergency lighting unit

5. MAINTENANCE (CONTINUED)

Replace with new batteries.

When the batteries have been replaced, mark the date on which the unit

was returned to service on the new maintenance label.

Unit Cat. No.

Battery Cat. No.

Type

0 625 24

0 610 87

Ni Cd 0.8 Ah –

2.4 V AA

0 625 74
0 625 14

2 x 0 610 87

0 625 54

0 610 90

Ni Cd 1.5 Ah - 2.4 V Cs

0 625 64

2 x 0 610 88

NiMH 2.2 Ah - 2.4 V Cs

Disconnect the batteries from the unit and remove them.

Legrand distribution partners take back used lighting units and batteries.

When the batteries have been changed, replace the maintenance label,

marking on it the date on which the unit was returned to service.

5.2 spare parts

• Batteries

5.3 Replacing the batteries

The batteries must be replaced when the self-contained unit can no

longer provide its rated operating time.

First remove the cover protecting the connector.

Remove the cover protecting the batteries with a screwdriver.

Содержание 0 625 14












Результаты поиска

Содержание 0 625 14

Отзывы:

Бренды по названию

Популярные бренды

LEGRAND 0 625 14, Руководство пользователя

Результаты поиска

Содержание 0 625 14

Отзывы:

Бренды по названию

Популярные бренды