5/8
PIR presence detector for high bay applications - ON/OFF
Technical data sheet: S000105276EN-2
Updated: 03/02/2021
Created: 27/11/2018
Cat. No(s): 0 489 59
CONTENTS
6. OPERATION
Detection mode
Presence: When movement is detected the load will automatically
switch on. When an area is no longer occupied, the load will switch off
automatically after an adjustable time period.
Absence: The load is manually switched on. When an area is no longer
occupied, the load will switch off automatically after the adjustable time
period has elapsed.
Manual control: short press to turn on, short press to turn off, press and
hold for dimming cycle.
In either case, sensitivity to movement of the PIR sensor can be adjusted
using the Sensitivity parameter.
HINT
: To assist in setting the sensitivity, turn on the Walk test LED which
will flash red when movement is detected.
Switching according to Lux level
Occupancy detection can be made dependent on the ambient light level
using the Lux On Level and Lux Off Level parameters.
Allumage
Extinction
Occupation
détectée
Plus
lumineux
Plus
Sombre
Seuil de luminosité
Off
Seuil de luminosité
On
Niveau d’éclairement
Temporisation
de luminosité ON
*
*
*
*
Temporisation
de luminosité OFF
**
7. SETTINGS
The detector functions are controlled by a number of parameters which
can be changed or programmed by an infrared configurator.
In combination with configuration tool 0 882 40, the Legrand Close
Up smartphone app can be used to view and modify all the detector
parameters with online help.
Point the infrared configuration tool at the detector for all read/write
operations.
Valid commands will be indicated by a red flashing LED on the product,
and the lighting switches off automatically for all read/write operations.
Before changing the settings, an initialisation operation must be
performed as suggested in the Legrand Close Up configuration app:
1 - Click on “Scan product settings”
2 - Click on “Settings details/copy”
3 - In the menu at the top right (…) select “Initialise”
4 - Click on “Write product settings”
This operation allows predefined setting of certain parameters.
