2/8
PIR presence detector for high bay applications - ON/OFF
Technical data sheet: S000105276EN-2
Updated: 03/02/2021
Created: 27/11/2018
Cat. No(s): 0 489 59
CONTENTS
TECHNICAL CHARACTERISTICS (CONTINUED)
230 V
A
10 A
10 A
10 A
10 A
10 A
230 V
A
10 A
10 A
10 A
10 A
10 A
1 - Halogen lamps
2 - ELV halogen lamps with
separate ferromagnetic ballast
3 - Fluorescent tubes with separate
ferromagnetic ballast
4 - Compact fluorescent lamps with
separate ferromagnetic ballast
5 - ELV halogen lamps with
separate electronic ballast
6 - Fluorescent tubes with separate
electronic ballast
7 - Compact fluorescent lamps with
built-in electronic ballast
8 - Compact fluorescent lamps with
separate electronic ballast
9 - LED lamps with separate
electronic ballast
10 - LED lamps with built-in
electronic ballast
2
7
3
8
5
4
9
1
6
3. DIMENSIONS
Detector
Surface mounting accessory
4. CONNECTION
Wire the products as shown in the diagram.
The auxiliary switch is optional. It can be used to switch the lighting on
and off.
N
L
L/Out
Absence detection mode
To use absence detection, a push-button must be connected between
the 2 terminals on the diagram (mains voltage switching).
The unit ships with presence detection as default. To change to absence
detection, press and release the push-button 5 times within a minute
of power-up. The LED lights up for 30 seconds to indicate that absence
detection mode has been selected.
To change back to presence detection, repeat the above procedure:
the LED flashes for 30 seconds to indicate that presence mode has been
selected.
Note: The above adjustments can also be made using the infrared
configurator.
