LEGRAND 0 489 59, Руководство пользователя

Страница: 1 / 8

1/8
CONTENTS
PIR presence detector for high bay applications - ON/OFF
Technical data sheet: S000105276EN-2 Updated: 03/02/2021 Created: 27/11/2018
Cat. No(s): 0 489 59
128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex
Tel: +33(0)5 55 06 87 87 Fax: +33(0)5 55 06 88 88
www.legrand.com
CONTENTS Page
1. Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Technical characteristics . . . . . . . . . . . . . . . . . 1
3. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4. Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
6. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7. Parameter setting . . . . . . . . . . . . . . . . . . . . . . . 5
8. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 7
9. Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
10. Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
11. Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1. USE
This PIR (passive infrared) presence detector provides automatic control
of lighting loads with optional manual control.
It is a high sensitivity PIR detector suitable for high bay applications,
such as warehouses and factories, and where high detection sensitivity
is needed.
The unit detects movement using a PIR sensor and turns the load on.
When an area is no longer occupied, the load will switch off after an
adjustable timeout period.
The output channel includes a mains voltage switching relay for
ON/OFF control of lighting.
The unit can turn lights on when a room is occupied and off when
the room is empty. Optional settings allow lights to be turned off in
response to ambient daylight.
These units come complete with accessories that allow changes to the
detection area and surface mounting.
All functionality is fully programmable using an infrared configurator.
2. TECHNICAL CHARACTERISTICS
PIR sensor
Detects movement within the unit’s detection range, allowing load
control in response to changes in occupancy.
IR receiver
Receives control and programming commands from the infrared
configurator.
Light level sensor
Measures the overall Lux level in the detection area.
LED status
The LED flashes red to indicate the following:
Walk test LED active
When movement is detected
Valid setting received
TECHNICAL CHARACTERISTICS (CONTINUED)
Dimensions See dimensions section
Weight 0.2 kg (complete unit)
Power supply 230 VAC +/-10%
Frequency 50 Hz
Power consumption
ON 822 mW, OFF 847 mW
Terminal capacity 2.5 mm
2
Operating temperature -30°C to +35°C
Operating humidity 5 to 95% non-condensing
Material Flame-retardant ABS and PC/ABS
Type Class 2
Protection class IP40 without gasket and IP65 with
gasket